Baumer EA Series - Page 77

Baumer_EAx_EtherNetIP_EN_MNL 77/81 www.baumer.com
02.20
Instance Attribute 2 - Configuration Capability
Bit(s)
Called
Definition
Value
0
BOOTP Client
1 (TRUE) indicates that the device is
capable of obtaining its network
configuration via BOOTP.
1
1
DNS Client
1 (TRUE) indicates that the device is
capable of resolving host names by
querying a DNS server.
0
2
DHCP Client
1 (TRUE) indicates that the device is
capable of obtaining its network
configuration via DHCP.
1
3
DHCP-DNS Update
Set to 0
0
4
Configuration Settable
1 (TRUE) indicates that the Interface
Configuration attribute is settable.
1
5
Hardware Configurable
1 (TRUE) indicates that the IP Address
member of the Interface Configuration
attribute can be obtained from
hardware settings
1
6
Interface Configuration Change
Requires Reset
1 (TRUE) indicates that the device
requires a restart in order for a change
to the Interface Configuration attribute
to take effect. If this bit is FALSE a
change in the Interface Configuration
attribute will take effect immediately.
0
7
AcdCapable
(1) TRUE indicate that the device is
ACD capable
1
8-31
Reserved
Reserved for future use and shall be
set to zero.
0