Custom configurations and baselines
Introduction
This topic describes where to find information on how to create a custom configuration and define a baseline
for a performance check.
Overview
BD
®
Cytometer Setup Software (CS&T) software is used to define the baseline performance of your cytometer.
A baseline provides a starting point for the tracking of cytometer performance. When running a performance
check, you compare the results to the baseline.
See Optimizing cytometer settings (page 67). See the latest published filter guides available on our website
(bdbiosciences.com) for more information.
See the BD Cytometer Setup and Tracking Application Guide for information about creating custom
configurations and defining a baseline.
More information
l
Running a performance check (page 71)
34 BD FACSymphony™ A5 SE User's Guide
To Next Page
Loading...
