More information
l
Reusing an analysis (page 91)
Reusing an analysis
Introduction
This topic describes how to use global worksheets to apply the same analysis to a series of recorded tubes. Once
you define an analysis for a tube, you can use it to analyze the remaining tubes in the experiment. After
viewing the data, print the analysis or save it to a normal worksheet.
Reusing an analysis
To reuse the analysis:
1. Set the current tube pointer to the Beads_002 tube.
2. View the Beads_002 data on your analysis worksheet. Adjust the gates as needed.
Adjustments apply to subsequent tubes viewed on the worksheet. To avoid altering a global worksheet, save
an analysis to a normal worksheet, then make adjustments on the normal worksheet.
3. Print the analysis.
Saving the analysis
When you perform analysis with a global worksheet, the analysis does not save with the tube.
If you define your analysis on a global worksheet before recording data, you can specify to automatically save
the analysis after recording data. You set this option in User Preferences.
To save a copy of the analysis with a tube:
1. Expand the MyDataAnalysis global worksheet icon in the Browser.
2. Right-click its analysis and select Copy.
3. Click the Worksheets View button on the Worksheet toolbar to switch to the normal worksheet view.
4. Select Worksheet > New Worksheet to create a new normal worksheet.
5. Right-click the Beads_001 tube icon in the Browser, and select Paste.
Chapter 7 Recording and analyzing data 91
To Next Page
Loading...
