Laser Detector Channel Mirror Filter Parameter
UV (349nm or 355nm) A 40 765 LP 809/82 BP UV809
B 39 704 LP 736/64 BP UV736
C 38 675 LP 695/40 BP UV695
D 37 645 LP 660/30 BP UV660
E 36 595 LP 610/30 BP UV610
F 35 570 LP 585/30 BP UV585
G 34 535 LP 540/20 BP UV540
H 33 495 LP 515/60 BP UV515
I 32 425 LP 446.5/67 BP UV446
J 31 365 LP 379/34 BP UV379
Yellow-Green (561nm) A 49 800 LP 825.5/49 BP YG825
B 48 750 LP 780/60 BP YG780
C 47 735 LP 750/40 BP YG750
D 46 699 LP 730/50 BP YG730
E 45 680 LP 695/40 BP YG695
F 44 665 LP 670/20 BP YG670
G 43 645 LP 660/30 BP YG660
H 42 595 LP 602/40 BP YG602
I 41 570 LP 585/30 BP YG585
The following table contains a list of common dyes and the primary or secondary detector parameters to use
with them. When using multiple single-color fluorochrome controls, each control should be assigned to a
detector not used by any of the other single-color controls. When possible, assign each control to its primary
detector. If two controls that you are using share the same primary detector, assign one of them to a secondary
detector instead.
Chapter 5 Spectral functions 51
To Next Page
Loading...
