Chapter 3: Running Samples 55
sample, the instrument configuration includes the following parameters:
FITC, PE, PerCP, and APC.
2 Choose Edit > User Preferences.
• Verify that the settings under the General tab match those displayed in
Figure 3-2 (all checkboxes deselected).
Figure 3-2 User Preferences dialog
• Under the Templates tab, verify that the Default global worksheet
checkbox is enabled.
Refer to the BD FACSDiva Software Reference Manual for more information
about instrument configuration and user preferences.
LSR2.book Page 55 Tuesday, April 25, 2006 3:34 PM
To Next Page
Loading...
