68 BD LSR II User’s Guide
6 When event recording has completed, remove the first tube from the
cytometer.
The MyData worksheet plots should resemble those in Figure 3-10.
Figure 3-10 Recorded data showing singlet population
7 Install the second sample tube on the cytometer.
8 Move the current tube pointer to Beads_002.
9 Click Acquire Data to begin acquisition.
Before recording, preview the data on the MyData worksheet.
10 Click Record Data.
11 When event recording has completed, remove the second tube from the
cytometer.
LSR2.book Page 68 Tuesday, April 25, 2006 3:34 PM
To Next Page
Loading...
