BeaconMedaes TotalAlert Infinity - Page 41

4-7
TotalAlert Innity™ HTM Medical Gas Notication System
4107 9016 60.01
Figure 22: Setup Information Screen
Conguration Button
Figure 23: Entering the Security Password
Note:
If you would like to change the password, touch
Change Password. Enter a 4-10 digit password, and
touch the Enter button. Conrm the new password.
Touch the X button in the upper right to close the
SECURITY PASSWORD screen.
Figure 24: Changing the Security Password
Figure 25: Uncongured Conguration Screen
The SETUP INFORMATION screen is the rst screen that
users will see on an uncongured alarm. (The MAIN
screen is the rst screen that users will see on a
congured alarm.)
Password Setup - Uncongured Alarm
• Touch the Conguration button.
Entering the Password
The ENTER SECURITY PASSWORD screen appears.
• Enter the security password. (The default password
is 121212.)
• Touch the Enter button.
• Touch Continue to advance to the CONFIGURATION
screen.
• The CONFIGURATION screen will display as
uncongured and ready for setup.