Power On Setup Power On Setup Functions
Qlarity-Based Terminal Hardware 119
Press any key to exit this screen and return to the function name.
Press
[Next] or [Back] to move to the DONE section, and select Save and Exit to exit Power
On Setup.
8.4.12.2Use Password
Use this function to determine whether or not a password is required to access the Power On
Setup utility.
Press
[Next] or [Back] to move to MISCELLANEOUS. Press [Select] to move to Use Pass-
word
, and press [Select] again to move to the options. Press [Next] or [Back] to select Yes or
No, then press [Select] to return to the function name.
If you selected
Yes, the “Change Password” function appears for you to define the password,
as described in the following section.
Press
[Next] or [Back] to move to the DONE section, and select Save and Exit to exit Power
On Setup.
8.4.12.3Change Password
You will only see this function if you selected Yes at the “Use Password” field. Use this func-
tion to set up or change the Power On Setup password (see section 8.4.12.2).
Press
[Next] to move to Change Password, and press [Select]. The “Enter Password” prompt
and the arrow keys (
↑ ↓ ← →) with the [Select] key in the center are displayed.
Press a series of arrow keys in the order they must be entered as the password (e.g.,
↑↑→→).
An asterisk (*) appears in the “Enter Password” prompt for each arrow you press. When you
have finished entering the password, press
[Select] (in the center of the display). The “Con-
firm New Password” box is displayed.
Enter the password a second time to confirm it. The message, “Password will be changed on
exit with save” is displayed.
Press
[Next] or [Back] to move to the DONE section, and select Save and Exit to exit Power
On Setup. The next time you access Power On Setup, the new password will be required.
8.4.13Diagnostics
You will only see this category if your terminal is set up to use a keypad or keyboard. Use the
Diagnostics functions to verify that a keypad or keyboard key is working properly.
N
OTE
☞
Because the <Enter> key is required to exit Diagnostics, you cannot test it. All other keys may
be tested.
To Next Page
Loading...
Need help?
General
