932 655 638 2014-02-14| Beissbarth GmbH
26 | MT 788 | en
Contents
1. Symbols used 27
1.1 In the documentation 27
1.1.1 Warning notices -
Structure and meaning 27
1.1.2 Symbols in this documentation 27
1.2 On the product 27
2. User information 28
2.1 Important notes 28
2.2 Safety instructions 28
2.3 Electromagnetic compatibility (EMC) 28
3. Product description 28
3.1 Intended use 28
3.2 Prerequisites 28
3.3 Scope of delivery 28
3.4 Special accessories 28
3.5 MT 788 29
4. Commissioning 30
4.1 Unpacking 30
4.3 Set-up 30
4.2 Fitting the wheel guard 30
4.4 Electrical connection 31
4.5 Checking the direction of rotation 32
4.6 Compressed air connection 32
4.7 Calibration of MT 788 32
5. Fitting and removing the flange 33
5.1 Removing the flange 33
5.2 Fitting the passenger vehicle flange 33
5.3 Fitting the commercial vehicle flange 33
6. Fitting and removing the wheel 34
6.1 Passenger vehicle wheel attachment 34
6.2 Removing the passenger vehicle wheel 34
6.3 Commercial vehicle wheel attachment 35
6.4 Removing the commercial vehicle wheel 35
7. Operation 36
7.1 Control/display panel 36
7.1.1 Overview of LEDs 36
7.1.2 Control keys 36
7.2 Balancing programs 36
8. Wheel balancing 37
8.1 Selection of balancing program 37
8.2 Entering the wheel data 37
8.4 Attaching balance weights 38
8.4.1 Splitting balance weights (split program)
38
8.4.2 Clip-on weights and adhesive weights
without Easyfix® 38
8.3 Measuring unbalance 38
8.5 Manual vernier caliper 39
8.5.1 Determining rim width 39
8.5.2 Attaching balance weights 39
9. Minimizing unbalance (Commercial vehicle
wheel) 40
10. Settings 41
10.1 User settings 41
10.2 Basic settings 41
11. Faults 42
12. Maintenance 44
12.1 Recommended lubricants/oil mist lubricator 44
12.2 Cleaning and servicing 44
12.2.1 Service intervals 44
12.2.2 Removing condensate 44
12.2.3 Topping up oil in oil mist lubricator 44
12.2.4 Replacing oil in oil mist lubricator 44
12.3 Spare and wearing parts 44
12.4 Calibration 45
12.4.1 Call-up of calibration menu 45
12.4.2 Shaft unbalance correction 45
12.4.3 MT 788 calibration 45
12.4.4 Reference measurement 46
12.5 Self-diagnosis 46
13. Decommissioning 47
13.1 Temporary shutdown 47
13.2 Change of location 47
13.3 Disposal and scrapping 47
13.3.1 Substances hazardous to water 47
13.3.2 MT 788 and accessories 47
14. Technical data 47
14.1 MT 788 47
14.2 Dimensions and weight 47
14.3 Application range 47
To Next Page
Loading...
