BenQ T3300 - Imaging; Annotation; BDMK (Body Mark)

System Customization
T3300 Diagnostic Ultrasound System | 89 | B00601-010 4/10/17
8.1.5.3 Measurement
• Auto-clear Measurement after Unfreeze: Enable clearing all the measurements added
automatically after returning to the real-time scan.
• Continue Next Measurement: Enable initiating a second measurement automatically after the
first one is complete.
8.1.5.4 Exam
• Screen after End Exam: Select the screen to enter after touching End Exam.
• Export DICOM after End Exam: Enable exporting the exam in DICOM file format to the DICOM
server automatically after touching End Exam.
8.1.5.5 Print
• Print while Save: Enable printing out the scanned image automatically after touching Save.
8.1.5.6 Function Key
The system provides a function (configurable) key for quick access to your frequently used action.
• Function Key Actions: Touch Edit, assign a desired action to the function key, then touch
Save.
• Function Key Display Name: Edit the name for the function key.
8.1.6 Imaging
• Auto Focus by following CROI: Enable re-positioning focus to the center of the ROI
automatically when moving the ROI on the image in real-time Color/Power modes.
• Auto CROI by following SV: Enable re-positioning ROI to keep the sample volume in the center
of the ROI when moving the sample volume on the image in real-time B+Color/Power+PW/CW
modes.
• Auto Zoom-in Image for PW/CW Mode/Auto Zoom-in Ratio: Enable zooming-in images
automatically with the assigned ratio upon entering PW/CW modes. To change the zoom ratio,
select a desired percentage.
• Image Format: Select the saved image format.
• Cine Loop Length in Seconds (Length may vary depending on frame rate): Set the cine
loop length for each recording.
• PW Output Unit/CW Output Unit: Set the velocity display unit in PW/CW modes.
8.1.6.1 Display Layout
• M Mode Display Format/PW Mode Display Format/CW Mode Display Format: Set the
aspect ratio between the 2D imaging window and the time series window on the imaging screen.
8.1.7 Annotation
• Annotation Font Size/Arrow Size: Select a desired size.
• Label List: Touch Edit, select an application and check/uncheck each label to re-arrange the
label list, then touch Save.
8.1.8 BDMK (Body Mark)
• Default BDMK for Application: Touch Edit, select an application and touch a desired body
mark to set it as default, then touch Save.