BenQ T3300 - Measurement; Report; Dicom; Networking

System Customization
T3300 Diagnostic Ultrasound System | 90 | B00601-010 4/10/17
• BDMK List: Touch Edit, select an application and enable/disable each body mark to re-arrange
the body mark list, then touch Save.
8.1.9 Measurement
• Configuration of Calculation List: Touch Edit. Select a preset from the Calculation Package to
display available calculations below. To display/hide the calculation result after a set of
measurements are done, check/uncheck the calculation name. If you select OB, more than one
calculation method can be used in a calculation. Select the Author name to your desired
method/formula.
• Result Unit: Set the measurement unit.
• Caliper Size/Set Result Font Size: Select a desired size.
• Show Measure Line: Enable showing the measuring lines after performing a measurement.
• Result Position: Set the position of the measured results.
• Show Result: Set whether to show all or the last measured results, or to hide them all.
8.1.10 Report
• Default Report Template: Select an application and set its default report template based on the
preset selected, then touch Save.
• Built-in Prompt String/Built-in Finding String/Built-in Comment String: Touch Edit, edit or
add built-in strings used in the report, then touch Save.
• Report Display: Touch Edit, and select the display type of the Calculation Package in the report.
8.1.11 DICOM
Configure DICOM settings. For more information, see "DICOM Configuration" on page 55.
8.1.12 Networking
• Display the network connection status of the system in the Information window.
– Current Status: The IP address currently connected.
– Detailed Status: All IP addresses and MAC addresses.
• Configure the system network.
– Wifi Configurations: See "Connecting the System to the Wireless Network" on page 54.
– Ethernet Configurations: See "Connecting the System to the Network by Ethernet" on
page 54“.
8.1.13 Print
• Image Printer/Report Printer: Assign the printer for use when printing images/reports.
• Network Printing: Configure printer settings.
• Image Color Invert: Print out the image with colors inverted.
8.2 Servicing your system
If you encounter any problem using the system, need to update software, backup and restore data
or use the on board diagnostic tools, select the service tools. Some functionality may require access
keys and consultation available from technical support.