Field Description
• 3 "+ / @1$ 5+1?
• 3 "+ / =11 5+1?
• 3 "+ / @1$ 5+1?
• =? "+ / =11 5+1?
• =? "+ / =11 5+1?
• =? "+ / @1$ 5+1?
• =? "+ / =11 5+1?
• =? "+ / @1$ 5+1?
• ): The interface is created but remains inactive.
Current Speed / Mode Shows the actual mode and actual speed of the interface.
Possible values:
• "+ / =11 5+1?
• "+ / =11 5+1?
• "+ / @1$ 5+1?
• "+ / =11 5+1?
• "+ / @1$ 5+1?
• 57
Flow Control Select whether a flow control should be conducted on the cor-
responding interface.
Possible values:
• 5"1 (default value): No flow control is performed.
• "1: Flow control is performed.
• 3: Automatic flow control is performed.
To use port ETH5 with an SFP module, you can activate the following settings in this menu
for Switch Port :
Fields in the Switch Configuration for Switch Port 5 in SFP Mode menu
Field Description
Ethernet Interface Se-
lection
Assign a desired logical Ethernet interface to the switch port.
You can select from five interfaces, to . In the ex
bintec elmeg GmbH
8 Physical Interfaces
bintec RS Series 141
To Next Page
Loading...
