Field Description
WPA2 Cipher Only for Security Mode = 23 4 and 23
+ and for WPA Mode = 23 and 23 23
Select the type of encryption with which to apply WPA 2.
Possible values:
• 3 (default value): AES is used.
• 3 *4: AES or TKIP is used.
Preshared Key Only for Security Mode = 23 4
Enter the WPA password.
Enter an ASCII string with 8 - 63 characters.
Note
Change the default Preshared Key! If the key has not been
changed, your device will not be protected against unau-
thorised access!
EAP Preauthentifica-
tion
Only for Security Mode = 23 +
Select whether the EAP preauthentification function is to be ac-
tivated. This function tells your device that WLAN clients, which
are already connected to another access point, can first carry
out 802.1x authentication as soon as they are within range.
Such WLAN clients can then simply connect over the existing
network connection with your device.
The function is activated by selecting "1.
The function is enabled by default.
Fields in the menu MAC-Filter
Field Description
Access Control Select whether only certain clients are to be permitted for this
wireless network.
The function is activated by selecting "1.
10 Wireless LAN bintec elmeg GmbH
192 bintec RS Series
To Next Page
Loading...
