Field Description
•
•
• D
• -
• 4(+1
• 0*
• -=
• .
• A5
• A9
• 4
• *6
• *0
• .5
• 9AA
• D) 5
Source IP Address/
Netmask
Only for Type of traffic = %# 5 )3*! or
?%1# 2 )3*!
Enter the source IP address and corresponding netmask of the
original data packets, as the case arises.
Original Destination IP
Address/Netmask
Only for Type of traffic = %# 5 )3*!
Enter the destination IP address and corresponding netmask of
the original data packets, as the case arises.
Original Destination
Port/Range
Only for Type of traffic = %# 5 )3*!,
Service = $ and Protocol = *6, .5, *6/.5
Enter the destination port or the destination port range of the
original data packets. The default setting 311 means that the
port is not specified.
Original Source IP Ad-
dress/Netmask
Only for Type of traffic = ## % )3*!
Enter the source IP address and corresponding netmask of the
original data packets, as the case arises.
bintec elmeg GmbH
11 Networking
bintec RS Series 215
To Next Page
Loading...
