biosystems A15 - User Program Configuration

91
4.7 User’s program
In this section, the service options in the user program will be described. These options are intended to con-
gure the user’s access level.
Each section explains how to manage and create different levels of access to the user program of the analyser.
When the program is installed for the rst time, there is not a created user and access to the program is complete.
4.7.1 Conguration of the level of access to the analyser
To activate the option of level of access to the analyser, the rst time you should enter as administrator, whose
values are:
Name of user: admin
access key: A15
with this screen, the application with the operation by passwords is congured.
The rst time that the program is activated, it forces the user to change the initial password.
It is possible to create three types of user with different access levels: