47
3.10 Component relation
3.11 Auxiliar channel information
The rear left part of the instrument is where the communications cables are connected. There are two connections,
the COM1 and the COM2.
The COM1 is the main connection from the analyser to the computer. This connection should be always present to
analyser run propertly.
there are two connection types:
A - Cable type USB
B - Cable type RS-232
Only connect one cable type.
Component Reference
Home detector TCST1300
3 way electrovalve LVM115-6A-2U-1 from SMC
Cover magnet Neodimio D4x5
Lamp 6V 10W Gilway L6402
Pump motor NMB23ML-C343V-1
Rotor motor NMB17PMKD18V
Washing system motor SP600-EC-LC-L
Filter wheel motor NMB23ML-C343V-1
X motor NMB23ML-C343V-1
Y motor NMB17PMKD18V
Z motor NMB17PMKD18V
Rotor peltier TES-06339
Probe temperature sensor B57861-S302-F40
Rotor temperature sensor B57861-S302-F40
Hall efect sensor RELE REED A041 1D 2H 0500
Electronic box fan SUNON KD2406PTS1
Rotor fan SUNON KD2404PKS2
To Next Page
Loading...