Bizerba GSP H User Manual

Operation Instruction manual GSP
54 / 92 38107010002 en-US
Load product into vegetable hopper.
Place stomper in vegetable hopper be-
hind product.
Using handle, swivel in product holder
and position it on vegetable hopper.
Switch on machine.
Set slice thickness at knob.
Using the handle, move carriage uni-
formly forth and back.
The slices drop onto the depositing area
or can be removed directly by hand.
Once the slicing process is completed
set slice thickness to "0".
Switch off machine.
Fig.70: Vegetable hopper

Bizerba GSP H Specifications

General

Type	Slicer
Blade Diameter	330 mm
Cutting Thickness	0 - 24 mm
Material	Anodized aluminum
Operation	Manual
Voltage	230 V
Frequency	50 Hz
Protection Class	IP33