Bizerba GSP H User Manual

Instruction manual GSP Maintenance
38107010002 en-US 65 / 92
Work steps Recom-
mended clean-
ing agents
Procedure Cleaning devices Notes
Disinfection
Additional
measure
Use P3-al-
codes in con-
centrated form
Application
time accord-
ing to product
data sheet
Manual Disposable cloth should be com-
pletely wet
spray Manual sprayer * see comment
Add. safety: dis-
tance to surface
when spraying,
0.30m
Care
Additional
measure
Bizerba ma-
chine oil
Apply to shafts
and bearings ac-
cording to in-
struction manual
Disposable cloth Product-parts that
touch products must
be rinsed before
commencing opera-
tions
Mounting in reverse order
like disassembly,
see instruction
manual
Personnel must
have clean and dis-
infected hands
Precautionary
measures
Cover the machine when cleaning surroundings using spray and/or pres-
surized water
* Comment: Appropriate precautionary measures have to be taken to en-
sure that no damage is done to the environment!
The safety sheets and product sheets supplied with the cleaning and dis-
infectants must be read.
https://safetydata.ecolab.eu/
If cleaning agents are used that have not been recommended by the man-
ufacturer, damage can be caused to the machine, which is no longer pro-
tected by guarantee.
The following cleaning agents can be acquired from the Bizerba customer service:
Designation Order no. Packaging unit
P3-steril 50003250000 5 liters
Renolit Surf 94008963000 1 liters
P3-alcodes 50003260000 5 liters
Bizerba machine oil 94008900022 400 ml

Bizerba GSP H Specifications

General

Type	Slicer
Blade Diameter	330 mm
Cutting Thickness	0 - 24 mm
Material	Anodized aluminum
Operation	Manual
Voltage	230 V
Frequency	50 Hz
Protection Class	IP33