111
1. Press LIST SETUP. The LIST SWEEP SETUP page will be displayed.
2. Set the parameters for the sweep mode: sweep frequency point, reference value, the
high limits and the low limits.
3. Press [MEAS].
4. Press the softkey LIST SWEEP, LIST SWEEP DISP page will be displayed.
The following method can be used to improve the speed:
1. Set the range to the maximum that the capacitance may be, and lock this range.
2. Set Vm: OFF and Im: OFF in the MEAS SETUP page.
3. Test the DUT in the BIN COUNT page.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
