787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Preface -
Revision Record
Copyright © The Boeing Company. See title page for details.
D615Z003-TBC 0.4.19
10.12.20 - Updated graphic showing appearance of HUD during low
visibility takeoff.
10.12.20 - Added minimum deviation distance to show the ground excessive
deviation symbol.
Flight Path Vector Symbol with Guidance Cue
10.12.21 - added takeoff information for guidance cue.
10.12.21 - Added display information for FPV symbol.
Runway Edge Lines and Glideslope Reference Line
10.12.25 - Revised position of airplane symbol in graphic. Moved callout
numbers for clarity.
10.12.25 - Deleted the word "symbology" for nomenclature standardization.
Combiner
10.12.27 - Revised graphic for standardization.
Combiner Locking Lever
10.12.27 - Revised graphic to show locking lever in more detail.
10.12.28 - Revised CAUTION for stowing combiner.
Symbology Control Switch
10.12.28 - Deleted "symbology" for nomenclature standardization.
Section 20 - System Description
Introduction
10.20.1 - Revised cross reference for standardization.
Display Selection and Control
10.20.1 - Revised description of display configuration during normal
operations.
EFIS Control Panels
10.20.2 - Revised cross reference for standardization.
Cursor Location Control
10.20.12 - Revised cross reference for standardization.
Cursor Control Device (CCD)
10.20.13 - Changed "placing" to "tapping" in description of touch pad corner
areas.
10.20.13 - Added graphic depicting use of cursor location switches.
Auxiliary (AUX) Display
10.20.15 - Added description of the Auxiliary Display.
February 15, 2010
To Next Page
Loading...
