BONFIGLIOLI Active Cube User Manual

03/12 EM-ABS-01 for ACU 123
10.1.4 SSI encoders, rotary:
Due to the great number of SSI encoder variants, only an extract of specifications can be shown here.
Please refer to the encoder manufacturer's data sheets for the parameter settings.
Encoder / Parameter 1183 1184 1186 1187 1271 1272 1268 1269 1270
Sick AFM60B-BxPC032768
(without incremental
track)
32768 50xx 1-
internal
5.0 V 15 12 125
us
HHH -
Kübler Sendix 5863
(with SinCos track)
2048 61xx 1-
internal
5.0 V 17 12 125
us
- -
Sick AFM60B-TxKx001024
(SinCos)
1024 61xx 1-
internal
5.0 V 10 12 125
us
HHH -
1) Please refer to chapter
8.4.3 for setup of parameter Power supply 1186.
Note: Owing to the great number of encoder types and special solutions not documented publicly,
Bonfiglioli Vectron will not accept any responsibility for the settings specified.
10.1.5 SSI encoders, linear encoders:
Encoder 1183 1184 1186 1187 1271 1272 1268 1269 1270
Leuze AMS304i 1120 --- 50xx 1
2)
5.0 V 24 Bit distri-
buted
3)
2 H
4)
-
Sick DME4000-111 --- 50xx 1
2)
5.0 V 24 Bit distri-
buted
3)
8 H -
Vahle LIMAX2S-03-050-1000-
SSG0-U
--- 50xx 1
2)
5.0 V 24 Bit distri-
buted
3)
16 H -
1) Please refer to chapter
8.4.3 for setup of parameter Power supply 1186.
2) Due to the high power consumption, this encoder requires an external power supply. In this case,
set
Power supply 1186 = “1-Internal” and connect the encoder to an external power supply.
3) For setup of this parameter, refer to chapter
6.6.
4) Note behavior changeable via encoder parameters.
Note: Owing to the great number of encoder types and special solutions not documented publicly,
Bonfiglioli Vectron will not accept any responsibility for the settings specified.

BONFIGLIOLI Active Cube Specifications

General

Brand	BONFIGLIOLI
Model	Active Cube
Category	Inverter
Language	English