Bosch DS7200V2-EXP - Page 77

DS7200V2-EXP | Installation Guide | 3. Control Panel
Programming
EN | 77
Bosch Security Systems, Inc. | 04/12 | F01U253045-02
Alarm Output Option for ABC Keys
• Address: 0700
• Default: 0
• Selections: 0 to 7
Enter This Data Digit to Select Options
Alarm Output Options for ABC Keys
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
No Alarm Output for ABC Keys
•
Alarm Output for [A] Key
•
•
•
•
Alarm Output for [B] Key
•
•
•
•
Alarm Output for [C] Key
•
•
•
•
Reserved
This parameter assigns an alarm output option to the ABC keys. The alarm output activates for the
response type assigned to each key. This is a global parameter that affects all areas.
ABC Key Reports/Ack Beep Options
• Address: 0701
• Default: 0
• Selections: 0 to 15
Enter This Data Digit to Select Options
ABC Keys Report & Ack Beep Options
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
No Alarm Report for ABC Keys
•
Enable ABC Keys Reporting
•
•
•
•
•
•
•
•
Acknowledgement Beep for [A] Key
•
•
•
•
•
•
•
•
Acknowledgement Beep for [B] Key
•
•
•
•
•
•
•
•
Acknowledgement Beep for [C] Key
•
•
•
•
•
•
•
•
This is a global parameter that affects all areas.
• Enable ABC Keys Reporting: If this option is enabled, the keys report as follows:
- [A] Key reports as Zone 100
- [B] Key reports as Zone 101
- [C] Key reports as Zone 102
• Acknowledgement Beep for ABC Keys: If this option is enabled, the keypad beeps when the ARC
receiver acknowledges a report. If the key is not programmed for reports, the beep occurs on
activation.