Bosch eBike Active Line BDU310 - Preparation for Ebike Diagnostics

NEW
103
4.2 Prerequisites for Use 4.3 Preparation for eBike Diagnostics
1. Make sure that the battery is sufficiently charged (at
least one LED lit, respectively, 20% energy capacity).
2. Connect the Diagnostic
Dongle to a USB port on the
computer.
3. Start the DiagnosticTool on the computer.
4. The eBike system switches itself off automatically.
5. Use the supplied USB cable to directly connect the
on-board computer with a USB port on the com-
puter.
6. DiagnosticTool detects the connected eBike system
and connects all components step-by-step.
NEW
The DiagnosticTool opens with the start screen
depicted above.
Use of the original diagnostics cable prevents
interference and damage.
During the first use of the DiagnosticTool, first
select individual Configuration in the "Settings"
menu (see p. 105)
4.3 Preparation for
eBike diagnostics
Online training for DiagnosticTool Quiz for certificate purchase
4
DIAGNOSTICS