174
6.1 Safety Instructions6.1 Safety Instructions
X
Remove the battery from the mount before working
on the eBike.
X It is not permissible to open Bosch eBike compo-
nents. The warranty is voided and components may
be destroyed if they are opened by unauthorized
persons.
X Remove the drive unit only according to the instruc-
tions received from Bosch Service Hotline.
X Do not use a hammer when working on the drive
unit.
X No additional threadlocking adhesives are required
if original Bosch screws are used.
Instructions for Classic+ Line
&
bosch-ebike.net →Service → Technical Information
X Installing/Removing eBike Components
X Tightening Torques and Tool
X Electrical Connections
X Technical Data
X When replacing components mounted on the drive
unit and all other components of the eBike (e.g.
chainring, chainring spider, pedals): Only install
identical components or those specifically approved
by the bike manufacturer for the eBike.
Link to "Guide for parts replacement on CE
certified E-bikes with support up to 25 km/h"
from the German Bicycle Association (ZIV) and
the bicycle manufacturer VSF in the dealer portal
under bosch-ebike.net
→ Service → Technical Information
6.1 Safety Instructions
To Next Page
