Bosch eBike Active Line BDU310 - Use the - or + Buttons on the Control Unit to

63
2.12 eShift – Integrated Gear Shift Function 2.12 eShift – Integrated Gear Shift Function
eShift operation with Nyon
X Selection and configuration of the modes "Cadence
Control" and "Gear Control" (manual gear shift) in
the operating mode "Settings" → "My eBike"
X Press and hold the "Home" button on the control
unit to activate or exit the eShift mode
"Cadence Control" mode
X Use the "–" or "+" buttons on the control unit to
respectively decrease or increase the desired
cadence setting
X Alternatively, you can press and hold the "–" or "+"
buttons to change cadence in the five increment
segments of the bar display
"Gear Control" mode
X Use the "–" or "+" buttons on the control unit to
switch forward and back between multiple defined
gear ratios
Gear calibration
X Operating mode "Settings" → "My eBike"
X Follow the further instructions on the display.
X May also be required during the trip
Display of gear or cadence (A)
A
2
DRIVE UNIT