Bosch eBike Active Line BDU310 - Rack Battery

B
D
C
A H
F
G
E
A
G
186
6.6 Rack Battery
Pre-installation of the PowerPack mount
1. Slide the rail (A) fully into the
key cylinder (B) and clip it on.
2. Place the appropriate guide rail
adapter (C or D) into the hooks
on the rail.
3. Insert the plug with PowerPack
cable (E) into the key cylinder.
4. Insert the connector cover (F)
with mount (G) into the lock
cover (H).
5. Put on the lock cover (H) and
tighten it with three screws (G).
Key cylinders (incl. lock
cylinders) are available from
ABUS, AXA-BASTA and TRE-
LOCK or their respective
dealer partners.
X Torx wrench T15
X Torque wrench
X Mount the lock cover on the
key cylinder (Torx T15):
2 Nm
Work steps Tool
Tightening
torques
6.6 Rack battery
4 mm
8 mm
NEW
New spare parts:
X Cable for Rack Battery 720 mm,
Order number: 1.270.016.505
X eShift Y-Cable 750 mm,
Order number: 1.270.016.508