Bosch eBike Active Line BDU310 - Gear Calibration; Operating Mode Settings → My Ebike; Follow the Further Instructions on the Display; May also be Required During the Trip

65
2.12 eShift – Integrated Gear Shift Function 2.12 eShift – Integrated Gear Shift Function
Gear change
X Actuate the Shimano gear lever on the handlebar
For derailleur system: if the gearing has been
moved out of position (e.g. due to an impact on
the gearing or a fall), the
gear system must be
reset. For this procedure,
see the operating
manual of the gear system manufacturer.
Setting the starting gear
X Operating mode "Settings" → "My eBike" → "eShift
(Shimano)"
Highest start gear:
- 8-gear hub: 5th gear
- 11-gear hub: 7th gear
Operation with Nyon
Gear calibration
X Operating mode "Settings" → "My eBike"
X Follow the further instructions on the display.
X May also be required during the trip
Display of the gear (A)
A
2
DRIVE UNIT