Service log
Component Check Result
OK not OK corr. n.a.
General functional test and driving test Switching on/off at the cycle computer and battery
“WalkAssist” function
Installation position of speed sensor and spoke magnet
Backpedal brake (if available)
Software Check that software is up-to-date and update if necessary
Create a diagnostic report for all system components
Cycle computer and control panel Contacts not damaged, corroded or dirty
Button functions
Drive Unit Screws on the frame interface
Chainring holder
Chainring wear
Dirt behind chainring removed (without high-pressure
cleaner)
Battery and fixture Battery (damage)
Fixture (stability, complete)
Contacts not bent
“On/Off” button and keyboard membrane (function,
adhesion, bonding)
Connector cover (available, function)
Design parts Screws
OK = okay, not OK = not okay, corr. = corrected, n.a. = not applicable
eBike diagnostic report, 29. July 2017, 10:59 PM Page 4
Bosch eBike Diagnostic Software Version 4.3.5.0
D
NEW
112
4.6 "Service" menu
Service log
X Checklist for testing of eBike components during
a service performance. Fields can be be checked
off in programs such as Acrobat Reader.
To Next Page
