A CB
183
6.4 PowerTube 6.5 Frame Battery
Preinstalling the lock
1. Clip in the lock into the (A)
lower housing section (B).
2. Make sure that all five clips
have snapped into place.
Locks must be purchased
from ABUS, AXA-BASTA or
TRELOCK or their respective
dealer partners.
Installing the lower mount
adapter
X Place the mount adapter (C)
over the thread inserts in the
frame and tighten by screwing
(M5 x 20).
X Torx wrench T25
X Torque wrench
X Mount adapter on the frame
(Torx T25): 4 Nm
Work steps Tool
Tightening
torques
6.5 Frame Battery
NEW
New spare parts:
X Cable for Frame Battery 220 mm,
Order number: 1.270.016.504
X eShift Y-Cable 220 mm,
Order number: 1.270.016.506
X DualBattery Y-Adapter Kit,
Order number 0.275.007.930
(cable must be ordered separately)
6
INSTALLATION/
REMOVAL
To Next Page
