EasyManua.ls Logo

Bosch eBike Active Line BDU310 - Walk Assistance

Bosch eBike Active Line BDU310
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
57
2.9 Overview of Riding Modes 2.10 Walk Assistance
2.10 Walk assistance
"Walk" function
X Speed-regulated walk assistance
(min. 3 km/h, max. 6 km/h), or start assistance
up to 18 km/h for Performance Line Speed
Up to 3 km/h independent of the selected
gear
Powerful due to maximum torque
Function deactivated in riding mode "OFF"
NEW
Starting with model year 2018 hardware, a max.
speed of start assistance for Performance Line
Speed of 6 or 18 km/h (depending on country of
homologation
Operation
X 1. Press "WALK" button on the control panel
2. Starting with model year 2017, first press the
"WALK" button and then the "+" button on the
control unit and keep it pressed
X Function switches off automatically if:
the "WALK" button is released (up to model year
2016)
the "+" button is released (starting with model
year 2017)
the wheels of the eBike are blocked (e.g. by actu-
ating the brakes or impacting against an obstacle)
maximum speed for the function is exceeded
the crank is blocked
The "Walk" function may only be used for its
intended purpose. If the wheels have no contact
with the ground (e.g. mounted on a stand) when
the function is activated, then there is risk of
injury.
2
DRIVE UNIT

Table of Contents