C
A
B
D
105
4.4 Operation of DiagnosticTool 4.5 "Configuration" menu
4.5 "Configuration" menu
Read out the configuration data
X The configuration data of the eBike are read out
automatically.
X To start the process manually, click on the "Bicycle"
button (A).
Changing the configuration data
1. Make your desired changes here (fields that can not
be changed are greyed out).
2. Make sure that the "Perform software and appli
ca-
tion parameter update" box (B) is not activated.
3. Click on the button with the green arrow (C) to
transfer the changes to the eBike.
Configuration options
X Enter in key number for the battery lock.
X Wheel size correction up to max. +/– 5% (not for
Classic+ Line)
Fine correction of speed display The legally
stipulated shutdown speed is not influenced
here.
X Enable power supply to the bike lights (permanently
enabled on speed pedelecs).
X Switch power supply output (D) between 6 V/12 V
(depends on model year, see page 207)
If switching to 12 V, check the front light and
rear light for compatibility so that damage can be
prevented.
X Enable/disable walk assistance (not possible for
speed pedelecs)
Safety precaution for eBikes in the sales room:
Deactivate push assistance!
X Select display language and units for on-board
computer
X Adjust eShift system settings
(see starting on page 60)
4
DIAGNOSTICS
To Next Page
