Modular Fire Panel Product Description | en 15
Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089
Mounting Plate
An HMP0003A Mounting plate can be mounted in large mounting frames FBH0000A and
FHS 0000 A; this mounting plate can be individually equipped. It contains fixing holes for a
distributor rail.
USF 0000 A is fitted with a mounting plate ex works, which can be equipped as required. It
contains fixing holes for two distributor rails.
Equipment Limits
The table below shows the maximum number of:
– Modules
– Panel rails (short PRS-0002-C, long PRD 0004 A)
Housing type Modules Short rails Long rails
CPH 0006 A 6 1 1
MPH 0010 A 10 1 2
EPH 0012 A 12 - 3
PSF 0002 A - - -
PMF 0004 A - - -
USF 0000 A - - -
The table below shows the maximum number of:
– Panel controllers
– UPS power supply units
– Batteries
Housing type MPC UPS power
supply units
Batteries
CPH 0006 A 1 1 2x45Ah
MPH 0010 A 1 - -
EPH 0012 A - - -
PSF 0002 A - 1 2x45Ah
PMF 0004 A - 1 4x45Ah
USF 0000 A - - -
Installation Kits for 48cm (19") racks
Special installation kits are available for installing the frame installation housing in 482.6mm
(19") racks:
Housing type Installation kit, 482.6mm
CPH 0006 A FRB 0019 A
MPH 0010 A FRB 0019 A
EPH 0012 A FRB 0019 A
PSF 0002 A FRB 0019 A
PMF 0004 A FRM 0019 A
USF 0000 A FRS 0019 A