M610 Label Printer User Manual 8
Setup
Printer Settings
Printer Settings
Use the keyboard to configure standard settings, such as the language. For an introduction to the
keyboard, see “Using the Keyboard” on page 23.
Language
When turning the printer on for the first time, choose the language in which you want all printer menus,
functions, and data displayed.
To set the language:
1. Press FN + SETUP.
2. Use the navigation keys to move through the menu until Language is highlighted.
3. Use the up and down navigation keys to select the desired language.
4. Press ENTER to accept the choice.
Keyboards
Your keyboard configuration depends on the region where you do business. The following are the four
configurations currently supported on the M610 printer. See “Keyboards” on page 88 for layout.
Units of Measure
Set the unit of measure to inches or millimeters.
To set the unit of measure:
1. Press FN + SETUP.
2. Use the navigation keys to move through the menu until Units is highlighted.
3. Use the up and down navigation keys to select the desired unit.
4. Press ENTER to accept the choice.
Keyboard Type
QWERTY
AZERTY
QWERTZ
Cyrillic
To Next Page
Loading...
