Brady M610 - Hardware and Connectivity Problems

M610 Label Printer User Manual 10
Setup
Printer Settings
Print History
Use to retain the history of the last ten labels.
Note: Files created with Brady Workstation will not be retained in the print history.
To configure print history:
1. Press FN + SETUP.
2. Use the navigation keys to move through the menu until Print History is highlighted.
3. Use the up and down navigation keys to select the desired function.
• On: The printer retains a history of the last ten label files used.
• Off: Print history is no longer retained, but any existing history remains.
• Clear: Delete the history.
4. Press ENTER to accept the choice.
Font
Choose the font to use when creating labels on the printer. Only one font type can be selected per
label file.
To set the font:
1. Press FN + SETUP.
2. Use the navigation keys to move through the menu until Font Settings is highlighted.
3. Press ENTER to accept the choice and display the font settings.
4. For information on how to use the screen, see “Settings Screens” on page 22.
• Typeface: Select the style of lettering. The font types (Brady Fixed Width and Brady Alpine
give you the option of displaying a zero with or without a slash (Ø or 0) through it. In
addition, Chinese, Japanese, and Korean fonts are available. Additional fonts cannot be
downloaded to the printer.
• Auto: Automatically sizes the text to fit in the label as you type. The current font size is
shown in the upper left of the screen while editing a label.
• Font Size: Change the size of the text. Unavailable if Auto is selected.
• Attributes: Select one or more of bold, italic, and underline.
• Units: Choose whether to show the font size in points (a standard unit used in most word
processors) or millimeters.
5. Navigate to OK and press ENTER.
6. Press backspace to dismiss the menu. Alternatively, use the navigation keys to
navigate to the next setting that you want to configure.
Note: You can use the FONT key to change the size and attributes for a line of text while editing a
label, but the values specified here in the SETUP menu will continue to be used as the default
on new lines of text and new labels.