M610 Label Printer User Manual 56
Label Types
General
General
The General label type contains standard functions and formats used for most generic labels, but does
not provide templates as do other label types.
See “Editing Labels on the Printer” on page 31 for instructions on using the editing tools for the
General category of labels.
Note: The name of the specific label type being used is displayed in the Header bar below the label
supply indicator.
Wire Marker
The Wire Marker label type is designed to repeat entered data down the length of the label. The data
repeats as many times as possible, considering the font size and the wire size selected.
Pre-sized, self-laminating, or continuous label supplies can be used for wire marker labels.
To create a wire marker label:
1. Press LABEL TYPE.
2. Select Wire Marker.
3. Select the wire marker gauge and length.
Note: The label size is fixed by the gauge and size selected in the sub-menu, even if using
continuous label supply.
4. Enter the data.
The data is repeated down the wire marker label as many times as the length of the label
allows given the font size used. The smaller the font size, the more the data is repeated.
To Next Page
Loading...
