M610 Label Printer User Manual 1
1 Introduction
System Specifications
The M610 Label Printer printer has the following specifications:
• Weight 3.10 lb (1.41 kg) (with battery pack and materials)
• Thermal Transfer Print Mechanism 300 dpi
• Optical Registration System for Precise Print Registration
• Elastomeric keyboard
• Removable lithium ion battery, 2700 mAh
• Print Width - 2.0 inches (51 mm) maximum label width
• Custom True Type Fonts
• Maximum print length for labels: 40" (990.6 mm)
• Prints up to 4,500 labels 1" x 2" labels per battery charge
Physical and Environmental Characteristics
The M610 Label Printer printer has the following physical and environmental characteristics:
Note: The table below refers to the M610 Label Printer printer only. Consumable performance
may vary.
Physical U.S. Units Metric Units
Dimensions 13.0" L x 4.3" W x 4.2" H 330 x 110 x 107 mm
Weight (with battery pack) 3.10 lb. 1.41 kg
Environmental Operation Storage
Temperature (Printer)
Exposing the printer to direct
sunlight is not recommended.
0° to 115° F (-18° to 46° C) -22° to 140° F (-40° to 70° C)
Relative Humidity (Printer)
20% to 90% (non-condensing) 10% to 90% (non-condensing)
Temperature (AC adapter) 14° to 104° F (-10° to 40° C) -4° to 185° F (-20° to 85° C)
Relative Humidity (AC adapter)
5% to 95% (non-condensing)
0% to 95% (non-condensing)
CAUTION! Avoid using the printer near water, in direct sunlight, or near a
heating device.
To Next Page
Loading...
