M610 Label Printer User Manual 38
Editing Labels on the Printer
Labels and Areas
Delete Label or Area
Deleting a label removes all data and formatting on that particular label. If multiple areas exist on one
label, when that label is deleted all the areas associated with that one label are also deleted. Deleting
an area removes it from the current label; it does not delete that area on all labels.
To delete a label or area:
1. Navigate to the label or area you want to delete. See “Go to Label or Area” on page 37.
2. Press LABEL if deleting a label or
press FN and AREA if deleting an area.
3. Choose Delete.
4. Select Yes on the confirmation message.
Duplicate Label or Area
Duplicating a label retains all formatting and content of the label being duplicated. If multiple areas
exist on the label, they will also exist on the duplicated label.
To duplicate a label:
1. Navigate to the label to duplicate. See “Go to Label or Area” on page 37.
2. Press LABEL.
3. Select Dup.
Justification
Justification refers to the alignment of data between boundaries (margins) on a label or in an area.
There are two types of justification: horizontal and vertical. Horizontal justification (H. Justify) aligns
data between the left and right boundaries of a label or area, while Vertical justification (V. Justify)
aligns data between the top and bottom boundaries of a label or area. Justification is applied to an
area or a label. It cannot be applied line-by-line.
To apply justification:
1. Navigate to the label or area where justification is to be applied. See “Go to Label or Area” on
page 37.
2. Open the label or area menu: press LABEL, or FN + AREA.
3. Choose H. Justify or V. Justify.
4. Choose the horizontal or vertical justification desired.
Horizontal Justification Vertical Justification
Left
Center
Right
Top
Middle
Bottom
To Next Page
Loading...
