Brady M610 - Loading Supplies; Ribbon; Removing; Loading

M610 Label Printer User Manual 14
Setup
Loading Supplies
Loading Supplies
Brady labels and ribbons come equipped with smart-cell technology that enables the
printer to recognize the type of label and ribbon installed and automatically set many
label formatting details. Only use labels and ribbons that have the Brady Authentic logo
Ribbon
The M610 printer comes with the ribbon installed.
Removing
Loading
IMPORTANT! Load the ribbon BEFORE loading label supply to avoid damage to the ribbon.
1. Before inserting, remove any ribbon slack by rotating the take-up spool end clockwise.
2. Carefully slide the ribbon cartridge into the printer until it seats firmly against the metal frame,
then flip the print head lock lever forward (to the left) to re-engage the printhead.
1. Flip the print head lock lever backward (to
the right) to disengage the print head.
2. Grasp the ribbon and gently slide out of
printer.