M610 Label Printer User Manual 62
Label Types
110-Block, Bix Block
To create 110- or Bix block labels:
1. Press LABEL TYPE.
2. Select 110-Block or Bix Block.
3. In the Block Type field, from the drop-down menu, select the pair configuration to use.
In the 110- and Bix Block applications, the number of areas created is based on the pair
configuration selected. Vertical and horizontal separator lines are automatically added.
The following example displays the areas based on the Block Type selected (2-pair, 3-pair,
4-pair, 5-pair, or Blank). The blank strip is formatted as two areas covering the full printable
length of the strip.
4. In the Sequence Type field, from the drop-down menu, select if and how you want to add
sequential data to the label.
• If None is selected, the areas are blank and you can independently enter data in each area
of the strip.
• Horizontal increments one number per area, based on the start value.
2 Pair
3 Pair
4 Pair
5 Pair
Blank
Text entered in area 1 prints here.
Text entered in area 2 prints here.
To Next Page
Loading...
