System Overview
1
1- 14 SpaceStation, 2.0 gb
2.0
Service Program
Approved Version
Note
Please note that text and / or functions of the Service Program
may change depending on the software version. The following
screen illustrations are only examples and represent the state
when the manual was printed.
- 0.0.28.0
- 1.3.5
- 1.5.0
- 2.0.1
Connection
Before starting the Service Program the PC is to be connected to
the device via the RS232 SP interface cable.
Starting the Service Program
Installation and further operation of the Service Program is de-
scribed in its separate instructions for use.
1. Start the „HiBaSeD.exe“ program (Hi
story, Barcode, Service,
D
rug list) on the PC. The Service Program is loaded and start-
ed and the initial window of the Service Program is displayed.
2. Read the notes carefully.
3. Mark the field “I accept all conditions” and then the field
“Yes” to confirm that you have read the notes.
Note
Click the field “English” to switch the language of the notes over
to English.
Abb.: 1 - 11
To Next Page
Loading...
Need help?
General
