System Overview
1
SpaceStation, 2.0 gb 1- 17
2.0
Compatibility List
1. Open the “Unit - Compatibility“ window via
Help
➨
Decice
compatibility
. This window displays the compatibility of the
HiBaSeD-version and the unit software version.
2. Close the window by clicking “OK”.
Quit the Service Program
1. Exit the Service Program via
File
➨
Exit
.
SpaceOnline
(only required with SpaceStation with SpaceCom) Approved Version
Note
Please note that text and / or functions of the SpaceOnline Pro-
gram may change depending on the software version. The follow-
ing screen illustrations are only examples and represent the state
when the manual was printed.
- 1.2.0
Connection
Before starting the SpaceOnline Program the PC is to be connect-
ed to the device via the RJ45 cross-over interface cable. In addi-
tion the PC-LAN connection must be configured with the correct
IP address (e.g. 192.168.100.1). Make sure that the first three digit
blocks, e.g. 192.168.100.xxx, of PC and the SpaceCom are identi-
cal.
Starting the SpaceOnline Program
1. Start the Internet Browser on your PC and enter the IP-ad-
dress of the SpaceCom. The SpaceOnline start screen appears.
Abb.: 1 - 16
To Next Page
Loading...
Need help?
General
