Disassembly / Assembly SpaceCom
4
4- 10 SpaceStation, 2.0 gb
2.0
4.7 Device Bracket
Designation Ord. No.
Device bracket SPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3452 1127
Insulating hood SPCO . . . . . . . . . . . . . . . . . . . . . . . . . . 3452 1043
Screws
(see „Service Parts and Screw Kit“ ➨ S. 4 - 2)
Disassembly
1. Loosen five screws (Abb.: 4 - 9 / Item 2) and remove screws
together with the serrated lock washers (Abb.: 4 - 9 / Item 1)
and the device bracket (Abb.: 4 - 9 / Item 3).
2. Remove insulating hood (Abb.: 4 - 9 / Item 4) from the power
supply.
Abb.: 4 - 9
Legende zu Abb. 4 - 9:
ItemDesignation
1 Serrated lock washer M5
2 Screw M5x45 A2 DIN912 TORX 25
3 Device bracket
4 Insulating hood
1
2
3
4