Braun SpaceStation - Pole Clamp Guide Removal and Installation

Disassembly / Assembly SpaceStation
3
3- 4 SpaceStation, 1.0 gb
3.3 Pole Clamp Guide
Designation Ord. No.
Pole clamp guide SPS. . . . . . . . . . . . . . . . . . . . . . . . . . . 3452 1135
Pole clamp lever
(see „Service Parts and Screw Kit“ ➨ S. 3 - 2)
Pole clamp spring
(see „Service Parts and Screw Kit“ ➨ S. 3 - 2)
Screws
(see „Service Parts and Screw Kit“ ➨ S. 3 - 2)
Disassembly
1. Loosen three screws (Abb.: 3 - 2 / Item 2) and remove the
screws together with the pole clamp guide (Abb.: 3 - 2 /
Item 1).
2. Remove pole clamp lever (Abb.: 3 - 2 / Item 4) and pole clamp
spring (Abb.: 3 - 2 / Item 3).
Abb.: 3 - 2
Legende zu Abb. 3 - 2:
ItemDesignation
1 Pole clamp guide
2 Countersunk screw M5x12 TORX 25
3 Pole clamp spring
4 Pole clamp lever
1
2
34
1.0