X7-8-Install-IG100 Installation Guide
Brocade
®
X7-8 Director Hardware Installation Guide
Figure 37: FC32-64 Blade Port Numbering
NOTE
Numbering (0-63) on this figure accounts for the quad ports available for 16 installed QSFP+ transceivers. The
physical QSFP+ ports are numbered 0-15 from bottom to top.
See Supported Transceivers and Cables for a list of qualified transceivers for blade ports.
The following table defines the eight-port Fibre Channel port groups for configuring trunk groups or "trunks." Color coding
on the physical blade identifies the port groups. On the blade, ports belonging to the same port group are indicated with
the same color border beneath the port on the blade label. Ports belonging to the same ASIC are indicated by a border
with a similar color tone.
X7-8-Install-IG100
115
To Next Page
Loading...