Broadcom Brocade X7-8 User Manual

X7-8-Install-IG100 Installation Guide Brocade
®
X7-8 Director Hardware Installation Guide
Figure 58: Fan Assembly Numbering
1. Fan Assembly 1
2. Fan Assembly 2
3. Fan Assembly 3
Precautions Specific to Fan Assemblies
Observe the following precautions when replacing fan assemblies.
NOTE
If a fan assembly has failed, do not remove it from the chassis unless an FRU is available for replacement. If the
slot is left empty for an extended time period, this could cause chassis air-leakage and overheating.
NOTE
Make sure that the captive screws securing fan assemblies to the chassis are tightened. If they are not
tightened, high pressure from fan operation may unseat the fan from chassis connectors.
X7-8-Install-IG100
174
Broadcom

Broadcom Brocade X7-8 Specifications

General

Brand	Broadcom
Model	Brocade X7-8
Category	Computer Hardware
Language	English