Broadcom Brocade X7-8 User Manual

X7-8-Install-IG100 Installation Guide Brocade
®
X7-8 Director Hardware Installation Guide
POST includes the following steps:
1. Preliminary POST diagnostics are run.
2. The operating system is initialized.
3. Hardware is initialized.
4. Diagnostic tests are run on several functions, including circuitry, port functionality, ability to send and receive frames,
all aspects of memory, parity, statistics counters, and serialization.
Boot
Gen 7 platforms implement Secure Boot. This feature enforces validation of the digital signature of the signed Boot Code
image in Boot Flash. It uses a pre-programmed public key HASH inside the CPU-internal-fuses to ensure authenticity and
integrity of the code prior to proceeding with the boot sequence.
In addition to POST, boot includes the following steps after POST is complete:
1. The digital signature of the signed image in Boot Flash flash code is validated against a pre-programmed public key in
the CPU to ensure integrity of the code prior to proceeding with the boot sequence.
2. Universal port configuration is performed.
3. Links are initialized.
4. The fabric is analyzed. If any ports are connected to other switches, the device participates in a fabric configuration.
5. The device obtains a domain ID and assigns port addresses.
6. Unicast routing tables are constructed.
7. Normal port operation is enabled.
Optical Transceiver Requirements
Optics are authenticated as genuine Brocade products during system boot or installation into a port. The user of specific
optics for Gen 7 Brocade switches and blades is required to ensure optimal performance and reliability.
Using Monitoring Commands
This section provides example output and an explanation for commands referenced in this guide for monitoring
and verifying operation of the director and various components, such as blades, power supply assemblies, and fan
assemblies.
Output for the following commands is provided:
•
chassisShow
•
errDump
•
fanShow
•
haShow
•
HistoryShow
•
psShow
•
sensorShow
•
sfpShow
•
SupportSave
•
switchShow
•
tempShow
X7-8-Install-IG100
91
Broadcom

Broadcom Brocade X7-8 Specifications

General

Brand	Broadcom
Model	Brocade X7-8
Category	Computer Hardware
Language	English