EasyManuals Logo

Broadcom Brocade X7-8 User Manual

Broadcom Brocade X7-8
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #156 background imageLoading...
Page #156 background image
X7-8-Install-IG100 Installation Guide
Brocade
®
X7-8 Director Hardware Installation Guide
Preparing for WWN Card Replacement
If the WWN cards require replacement, complete the following steps. Follow electrostatic discharge (ESD) precautions.
1. Open a Telnet session to the device and log on to the active CP blade as admin. The default password is "password".
2. Verify that you are logged on to the active CP blade. Run the haShow command to determine the active CP blade.
3. Run the supportSave command on the active CP blade to capture all settings. These settings will be referenced to
verify the settings have been correctly programmed after WWN replacement.
4. Run the following commands on the device before replacing the cards so that the data can be verified after the
replacement:
chassisname
chassisshow (look at the WWN and chassis information in the example below)
configupload -all
configupload -vf
ficonshow switchrnid (FICON/mainframe environments only)
ipaddrshow
licenseidshow
switchname
wwncardshow ipdata
The factory serial number and the sequence number in the following output from the chassisShow command should
match. In the ficonshow switchrnid output, a sequence number indicates the logical switch number, if virtual
fabrics are enabled:
switch:FID128:admin> chassisshow
<output truncated>
WWN Unit: 1
System AirFlow: Non-portside Intake
Header Version: 2
Power Consume Factor: -1W
Factory Part Num: 60-1003194-02
Factory Serial Num: DZH0331L039
Manufacture: Day: 3 Month: 10 Year: 15
Update: Day: 0 Month: 0 Year: 0
Time Alive: 24 days
Time Awake: 0 days
WWN Unit: 2
System AirFlow: Non-portside Intake
Header Version: 2
Power Consume Factor: -1W
Factory Part Num: 60-1003194-02
Factory Serial Num: DZH0331L032
Manufacture: Day: 3 Month: 10 Year: 15
Update: Day: 0 Month: 0 Year: 0
Time Alive: 24 days
Time Awake: 0 days
Chassis Factory Serial Num: AFY2530G00S
switch:admin> ficonshow switchrnid
X7-8-Install-IG100
156
Broadcom

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Broadcom Brocade X7-8 and is the answer not in the manual?

Broadcom Brocade X7-8 Specifications

General IconGeneral
BrandBroadcom
ModelBrocade X7-8
CategoryComputer Hardware
LanguageEnglish

Related product manuals