X7-8-Install-IG100 Installation Guide
Brocade
®
X7-8 Director Hardware Installation Guide
Table 2: Rack Mount Kits
Kit Par Number Short Description
XBR-DCX-0121 Mid-mount rack mount kit for two-post rack
XBR-DCX-0120 14U rack mount kit for four-post rack (27–
31 in.)
Rack Mount Kits
XBR-DCX-0152 14U rack mount kit for four-post rack (22
in.)
XBR-DCX4S-0120 27–31-in. rail rack mount kit for four-post
rack
XBR-DCX4S-0121 Airflow diversion kit for four-post rack (27–
31 in.)
XBR-DCX4S-0130 Airflow diversion kit for four-post rack (18–
24 in.)
Rack Mount Kits
XBR-X64-0126 8U mid-mount rack kit for X6-4 Director for
two-post rack
Notes, Cautions, and Danger Notices
Notes, cautions, and danger statements may be used in this document.
NOTE
A Note provides a tip, guidance, or advice, emphasizes important information, or provides a reference to related
information.
CAUTION
A Caution statement alerts you to situations that can be potentially hazardous to you or cause damage to
hardware, firmware, software, or data.
DANGER
A Danger statement indicates conditions or situations that can be potentially lethal or extremely hazardous to
you. Safety labels are also attached directly to products to warn of these conditions or situations.
Contacting Technical Support for Your Brocade
®
Product
If you purchased Brocade product support from a Broadcom OEM/solution provider, contact your OEM/solution provider
for all your product support needs.
X7-8-Install-IG100
11