Broadcom Brocade X7-8 - Page 135

X7-8-Install-IG100 Installation Guide Brocade
®
X7-8 Director Hardware Installation Guide
2. Enter the following commands and note any error conditions:
•
slotShow – Displays the current data on each slot in the system, including blade type, blade ID, status, Brocade
model name, and power usage.
•
tempShow – Displays temperature reading of blades.
•
sensorShow – Displays temperature reading of blades with fan and power supply status.
•
chassisShow – Displays information about each component in the system.
•
errDump – Displays the entire system error log.
•
errShow – Displays error log messages one at a time.
For output examples and additional information on Fabric OS commands, see Using Monitoring Commands
and the Brocade Fabric OS Command Reference Manual. For more information on error messages, refer to
the Brocade Fabric OS Message Reference Manual.
X7-8-Install-IG100
135
Broadcom