Broadcom Brocade X7-8 User Manual

X7-8-Install-IG100 Installation Guide Brocade
®
X7-8 Director Hardware Installation Guide
4. Access the device using a terminal emulator application (such as HyperTerminal in a Windows environment or tip in a
UNIX environment).
5. Disable any serial communication programs running on the workstation (such as synchronization programs).
6. Open a terminal emulator application (such as HyperTerminal on a PC, or TERM, TIP, or Kermit in a UNIX
environment), and configure the application as follows:
•
In a Windows environment:
Parameter Value
Bits per second 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
NOTE
Flow control is not supported on the serial consoles when the serial consoles are attached to remote
terminal servers and must be disabled on the customer-side remote terminal server and the host-side
clients.
•
In a UNIX environment, enter the following string at the prompt:
tip /dev/ttyb -9600
If ttyb is already in use, use ttya -9600 instead.
When the terminal emulator application stops reporting information, press Enter . The following logon prompt
displays:
CP0 Console Login:
NOTE
CP0 in the preceding prompt is an example. "CP1" will display if it is the active CP.
7. Log on to the console using admin as the default logon name and password as the default password.
As logon to the device occurs, you are prompted to change the device passwords.
Please change passwords for switch default accounts now.
Use Control-C to exit or press 'Enter' key to proceed.
8. Press Enter to step through a procedure to change the passwords as shown in the following example. To skip
modifying the password, press Ctrl+C .
-----------------------------------------------------
for user - admin
Changing password for admin
Enter old password:
Enter new password:
Re-type new password:
passwd: all authentication tokens updated successfully
Passwords can be 8 to 40 characters long. They must begin with an alphabetic character. They can include numeric
characters, periods (.), and underscores (_) only. Passwords are case-sensitive, and they are not displayed when you
enter them on the command line. For more information on passwords, refer to the Brocade Fabric OS Administration
Guide.
X7-8-Install-IG100
49
Broadcom

Broadcom Brocade X7-8 Specifications

General

Brand	Broadcom
Model	Brocade X7-8
Category	Computer Hardware
Language	English